| Thomson Precision Steel Ball Bushing* Bearing offer | |
 |
A coefficient of friction as low as .001. When
replacing high friction plain bearings, Precision Steel Ball Bushing bearings dramatically improve machine productivity and efficiency. |
|
|
All-steel construction, for maximum system rigidity. |
|
|
Two accuracy classes allowing for immediate improvements in system positioning and repeatability. |
|
|
Availability in fourteen bore sizes and nine configurations. |
|
|
The RoundRail* Advantage which minimizes installation time and cost. |
|
|
Steady state travel speeds up to 10 ft/s and accelerations to 450 ft/s2 without the use of derating factors. |
|
|
An operating temperature up to 600º F. |
|
|
Availability in a self-aligning pillow block housing for ease of installation and use. |
|
|
Worldwide availability from over 1800 authorized distributors. |
| Thomson Super Ball Bushing Bearings (Closed type) | |
|
|
Available in sizes 3/16 to 2 inch diameter. |
|
|
Load Capacity range from 35 to 3,000 lbf. |
|
|
Self-aligning in all directions. |
|
|
Can be mounted in a custom housing. |
|
|
Can be adjusted to take out diametrical clearance. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Available with corrosion resistant components. |
| Thomson Super Ball Bushing Bearings (Open Type) | |
|
|
Available in sizes 1/2-2 inch diameter. |
|
|
Load capacity ranges from 230 to 2,350 lbf. |
|
|
Self-aligning in all directions. |
|
|
Can be adjusted to take out diametrical clearance. |
|
|
Can be mounted in customized housing. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Available with corrosion resistant components. |
| Thomson Sealed Super Ball Bushing Bearings (Closed type) | |
|
|
Integral double acting seals retain lubrication and keep out contamination. |
|
|
Available in sizes 1/2, 3/4 and 1 inch nominal diameter. |
|
|
Load capacity range from 255 to 1,050 lbf. |
|
|
Self-aligning in all directions. |
|
|
Can be adjusted to take out diametrical clearance. |
|
|
Can be mounted in a custom housing. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Available with corrosion resistant components. |
| Thomson Sealed Super Ball Bushing Bearings (OpenType) | |
|
|
Standard integral double acting seals retain lubrication and keep out contaminants. |
|
|
Available in sizes 1/2, 3/4 and 1 inch diameter. |
|
|
Load capacity ranges from 230 to 780 lbf. |
|
|
Self-aligning in all directions. |
|
|
Can be adjusted to take out diametrical clearance. |
|
|
Can be mounted in customized housing. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Available with corrosion resistant components. |
| Thomson Super Ball Bushing Bearing Pillow Blocks (Closed Type) | |
|
|
Available in sizes 1/4 to 2 inch diameter. |
|
|
Load capacity range between 60 and 3,000 lbf. |
|
|
Available with standard integral double acting seals. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Available with or without diameter adjustment capability. |
|
|
Easily mounted and secured with four mounting bolts (sizes 1/4 and 3/8 secured with two mounting bolts). |
|
|
Available with a standard lubrication access. |
| Thomason Super Ball Bushing Bearing Pillow Blocks (Adjustable Type) | |
|
|
Available in sizes 1/4 to 2 inch diameter. |
|
|
Load capacity range between 60 and 3,000 lbf. |
|
|
Available with standard integral double acting seals. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Available with or without diameter adjustment capability. |
|
|
Easily mounted and secured with four mounting bolts (sizes 1/4 and 3/8 secured with two mounting bolts). |
|
|
Available with a standard lubrication access. |
| Thomson Super Ball Bushing Twin Pillow Blocks (Closed Type) | |
|
|
Available in sizes 1/4 to 1 1/2 inch diameter. |
|
|
Load capacity range between 120 and 4,000 lbf. |
|
|
Available with standard integral double acting seals. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Available with or without diameter adjustment capability. |
|
|
Easily mounted and secured with four mounting bolts. |
|
|
Available with a standard lubrication access. |
| Thomson Super Ball Bushing Cartridge Bearings | |
|
|
Available in sizes 1/4, 3/8 and 1/2 inch diameter. |
|
|
Can be easily installed into a soft or slightly out-of-round housing. |
|
|
Available in both single or twin versions and with or without integral double acting seals. |
|
|
Single versions are self-aligning in all directions. |
|
|
Twin versions minimize installation time and cost. |
|
|
Available with corrosion resistant components. |
| Thomson Miniature Instrument Ball Bushing Bearings | |
|
|
Available in sizes 1/8, 3/16 and 1/4 inch bore diameter. |
|
|
Available with matching 60 Case LinearRace* sets. |
|
|
Coefficient of friction as low as .001. |
|
|
Compact size for low inertia and weight. |
|
|
Precision bearing balls, sleeve and 60 Case Linear Race manufactured of corrosion resistant stainless steel. |
|
|
Load Capacity range between 7 and 19 lbf. |
| Thomson Die Set Ball Bushing Bearings | |
|
|
Available in sizes 1, 1 1/4, 1 1/2 and 2 inch bore diameter. |
|
|
Load Capacity range between 350 and 1,100 lbf. |
|
|
All steel construction for maximum rigidity. |
|
|
Travel speeds up to 10 ft/s. |
|
|
Easily mounted by simply bolting toe clamps in place. |
|
|
Can be mounted perpendicular to mounting surface. |
|
|
High operating temperature capability. |
|
|
Coefficient of friction as low as .001. |
Accent Bearings Co. Inc.
367 -G South Rohlwing Road
Addison, Illinois 60101
(630) 916-1930
Fax
(630) 916-7740
Created by the
Internet Wizard
Success Training Academy
Global
Broadcasting
Internet
Wizard